The 5 Best Chorus Pedals for Acoustic Guitar

CE-5 Stereo Chorus Ensemble Guitar Pedal (CE-5)

Strum an open chord and let the top strings ring. A little chorus can make those notes spread out and shimmer, almost as if another guitar has joined in. Turn it up too far and the bass starts wandering underneath your hand. The best chorus pedal for acoustic guitar gives you enough control to find the space between those two sounds.

The BOSS CE-5 is the first choice here because its high-cut and low-cut controls let you shape the effected sound around the guitar. That’s particularly useful when your thumb is carrying a bass line and you want the movement to sit mostly above it. The CH-1 is simpler to navigate, while the MXR Analog Chorus offers another way to shape the highs and lows. The two Electro-Harmonix pedals suit players who prefer to find a sound quickly and get back to the song.

The 5 Best Chorus Pedals for Acoustic Guitar

1. BOSS CE-5 Chorus Ensemble (Editor’s Choice)

CE-5 Stereo Chorus Ensemble Guitar Pedal (CE-5)

The CE-5 is a good place to start if you like the idea of chorus but keep finding that it interferes with the bottom strings. Its separate high-cut and low-cut controls give you a way to shape the chorus sound instead of changing your whole acoustic tone. With a fingerpicked part, try reducing the low end of the effect before turning up Depth. The thumb can keep a steady pulse while the upper strings carry more movement.

Rate, Depth and E.Level are separate controls. That last one matters: if the guitar starts sounding seasick, you can pull back the chorus level while keeping the slower movement you liked. Set the sound with the same picking pattern you intend to play. A big open chord may flatter a setting that turns a moving bass line into a blur.

Choose the CE-5 if you want to use chorus on several different arrangements, especially when some have exposed bass notes. It offers more adjustment than the Neo Clone, and that is also the trade-off. The filters deserve a few minutes of patient listening. Start with the effect quiet and move one control at a time, rather than hunting for a dramatic sound on the first strum.

Pros

  • Independent high-cut and low-cut controls for the effect
  • Separate chorus level, rate and depth
  • Mono operation and a second output for a suitable two-channel setup

Cons

  • More controls to learn than a simple two-setting chorus
  • A stereo effect needs an appropriate two-channel signal path
Check Price at Amazon

2. BOSS CH-1 SUPER Chorus

CH-1 SUPER Chorus Classic Compact Chorus Effects Pedal

The CH-1 makes sense when you want one chorus sound for a handful of songs and would rather not manage two filter controls. E.Level sets the effect amount, Rate sets the speed, Depth sets the intensity, and EQ shapes the effect’s brightness. BOSS describes the EQ as a low-pass filter on the effected sound. You can soften the shimmer without rolling the treble off the dry guitar.

Try it with a slow Rate and modest Depth, then bring E.Level up while playing a chorus of the song. Stop when you can hear the movement in the gaps between the vocal phrases. If the effect competes with your voice, take E.Level down a little before changing the speed. That often preserves the sense of width you were after.

The CH-1 is the more straightforward BOSS choice here. It doesn’t offer the CE-5’s separate low-cut control, so a bass-heavy part may call for less effect overall. Its second output is useful when the rest of your rig can accommodate it, but a single mono connection is enough to judge whether the basic voice suits your guitar. Build that sound first.

Pros

  • Separate effect level makes subtle settings easy to adjust
  • EQ changes the brightness of the chorus sound
  • Familiar four-control layout

Cons

  • No separate low-cut control for the effect
  • Wide two-output sounds depend on the downstream rig
Check Price at Amazon

3. MXR M234 Analog Chorus

Analog Chorus

The MXR Analog Chorus is worth comparing if you want a softer modulation voice and still need detailed control over its frequency range. The bucket-brigade design is paired with Low and High controls, plus Level, Rate and Depth. On an acoustic part, the practical attraction is being able to shape the sound around the playing instead of accepting one broad wash over every string.

Use the Low control while alternating a low string with a treble chord. Listen for the point where the bass stops drawing attention to the effect. Then use High to decide how much of the pick’s bright edge reaches the chorus sound. Leave the dry tone where you like it. A change to the effect should not become an excuse to keep rebuilding the guitar’s main EQ.

This pedal suits the player who enjoys a little adjustment at soundcheck and wants the modulation to feel like part of the instrument. It has more front-panel control than either EHX option. It also needs more care if someone else borrows the board: a small change to both filters and Level can move the sound a long way. Mark a useful setting once you have heard it through your actual amplification.

Pros

  • Low and High controls help fit the effect around an acoustic part
  • Separate Level, Rate and Depth
  • Analog bucket-brigade design

Cons

  • Five controls take more setup time
  • No onboard preset recall for recovering a changed setting
Check Price at Amazon

4. Electro-Harmonix Neo Clone

Neo Clone Analog Chorus Pedal

The Neo Clone is the option for a player who wants to stamp on a chorus and hear a distinct change without studying a row of knobs. It has a Rate control and a two-position Depth switch. That keeps the job simple: choose the gentler depth, find a slow movement, and try it on a verse before deciding whether the deeper setting has a place in the song.

An exposed acoustic arrangement is a useful test. Let a chord ring, then play a moving bass note underneath it. With no dedicated effect-level or tone control on the pedal, you have fewer ways to tuck the movement into the background. If you love the character at a gentle setting, that simplicity is a benefit. If you keep wishing the bass were less affected, the CE-5 or MXR is a better match.

The compact enclosure is handy on a small acoustic board already carrying a tuner and a preamp. Choose it for songs that can accommodate a clearly audible chorus, rather than expecting a full set of subtle frequency-shaping options. The limitations are visible on the panel before you buy, and they are the reason this pedal sits below the more adjustable choices here.

Pros

  • Simple Rate control and two-position Depth switch
  • Compact format
  • Quick to return to a basic setting

Cons

  • No separate effect-level adjustment
  • No onboard filtering to reduce the chorus on bass notes
Check Price at Amazon

5. Electro-Harmonix Small Clone

Small Clone Chorus (Small Clone)

The Small Clone is another simple analog chorus, with a large Rate knob and a Depth switch. Compared with a more adjustable pedal, its appeal is the ease of committing to a sound. A slower rate can put movement under sustained chords, while the deeper setting makes the modulation more obvious. It is a good candidate if chorus is meant to be part of the arrangement’s character.

Play a sparse intro and then the busiest section of the song before choosing a depth. A setting that sounds beautiful under two ringing notes may be too much for a full strummed chorus. Since there is no blend knob, you cannot simply leave a strong setting in place and turn its contribution down. You need to like how the depth choices work with the guitar.

The larger enclosure also deserves a place in the decision. On a board shared with an acoustic preamp, DI and tuner, the Neo Clone may be easier to accommodate. The Small Clone earns consideration when its straightforward controls and recognizable chorus voice are the things you actually want. A bigger pedal does not automatically make a better acoustic effect.

Pros

  • Large Rate knob is easy to see and reach
  • Straightforward Depth switch
  • Analog chorus with a deliberately simple control set

Cons

  • Larger enclosure than the Neo Clone
  • No dedicated mix or frequency controls
Check Price at Amazon

How to Set Chorus for Acoustic Guitar

Start with the effect level low

Get the dry guitar sounding right through the amp or PA first. Turn off reverb and delay while setting the chorus so you can hear its contribution. On a pedal with a level control, begin with very little effect and use a slow rate. Bring it up while playing the actual part. The point where you first notice the movement is a more useful starting position than a dramatic setting discovered on a held chord.

Play the section with the most bass movement before you settle on Depth. If the low notes seem to sway in pitch, reduce Depth or the low-frequency contribution where the pedal provides that control. With a simple chorus that lacks filtering, lowering the intensity may be the only practical answer.

Check a fingerpicked part and a strummed part separately

A fingerpicked arrangement leaves space around individual strings. Chorus can fill those gaps beautifully, but it can also make an alternating bass pattern feel unsteady. Use a consistent pattern and listen to the lowest note each time it returns. Keep it recognizable as the anchor of the part.

Strumming presents another problem. There may already be enough overlapping strings to create a rich sound. Chorus can make the pick attack less distinct when the vocal and other instruments arrive. Turn the effect on and off at matched volume during the full arrangement. If you only like it when the guitar is playing alone, reserve it for the intro or another sparse section.

Listen in mono before using two outputs

A wide stereo chorus can be impressive beside two speakers. A venue may use a mono input, and listeners away from the center will hear a different balance from the one you hear at soundcheck. Test the exact mono connection you expect to use. Consult the pedal’s output instructions instead of assuming that either socket carries the same signal.

If the system really is stereo, walk away from the board and listen from several positions. Keep the effect strong enough to add interest without making the guitar depend on a perfect seat between the speakers. A two-output rig is useful only when the audience gets a useful result from it.

Where Should a Chorus Pedal Go in an Acoustic Signal Chain?

For an acoustic-electric with a working onboard preamp, a practical starting arrangement is guitar, tuner, tone-shaping preamp or EQ, chorus, then reverb and the final DI or suitable amplifier input. This lets you establish the basic guitar sound before adding movement. Follow the input and output requirements of the actual preamp and DI, because some acoustic boxes combine several of these jobs.

A passive pickup may need an appropriate high-impedance preamp before the pedals. Chorus is not a cure for a pickup that sounds thin because it is loaded incorrectly. Check that basic connection first. Also leave room for the loudest strum when setting input gain: a gentle fingerpicked soundcheck can hide distortion that appears as soon as you play the full song.

Is Chorus Good for Acoustic Guitar?

It can be especially useful on sparse chords, slow arpeggios and arrangements with space around the guitar. Treat it as an arrangement choice. A dry, percussive rhythm part may work better without it, and a chorus pedal does not need to stay on for every song to earn its spot.

For subtle use, the CE-5 is the strongest starting point in this group because its filters and effect level give you several ways to keep the dry part intelligible. The CH-1 offers a simpler adjustment process. If you prefer the character of a more obvious analog chorus, compare the MXR and the two EHX options with your own picking pattern. The best setting is the one that still makes the song feel right when the singer comes back in.